Parts Sensors and input
PIR Motion Sensor
An HC-SR501 style motion sensor whose output holds high after the motion stops.
- Category
- Sensors and input
- Size
- 20.3 × 15.2 mm
Pins
| Pin | Role |
|---|---|
VCC | Power |
OUT | Output |
GND | Ground |
Settings
Change these in the part's properties on the canvas.
- Motion detected
- Off
- Hold time after motion
- 2 s
- Output high level
- 3.3 V
How PinBench simulates it
- A retriggerable one-shot: OUT goes high on motion and stays high for the hold time after the motion ends.
- Trigger it from its properties while the sketch runs.