Parts Boards
Raspberry Pi Pico W
The RP2040 board with 40 castellated pins, lying across a breadboard's channel as the real one does.
- Category
- Boards
- Chip
- RP2040
- Pins
- 40
Pins
GPIO
- GP0
- GP1
- GP2
- GP3
- GP4
- GP5
- GP6
- GP7
- GP8
- GP9
- GP10
- GP11
- GP12
- GP13
- GP14
- GP15
- GP16
- GP17
- GP18
- GP19
- GP20
- GP21
- GP22
- GP26
- GP27
- GP28
Power
- VBUS
- VSYS
- 3V3(OUT)
- 3V3_EN
- ADC_VREF
Ground
- GND × 8
- AGND
Other
- RUN
How PinBench simulates it
- The RP2040 is emulated, and runs the sketch you compiled for it with the arduino-pico core:
Serialover USB,Serial1on GP0/GP1, PWM, the ADC on GP26–28, and I²C (Wire) on GP4 (SDA) and GP5 (SCL). - A GPIO is its number in code:
digitalWrite(15, HIGH)drives GP15. The board's own LED isLED_BUILTIN, and lights on the canvas when the sketch drives it. - VBUS, VSYS and 3V3(OUT) are supplies in the circuit solver, at 5 V, 4.7 V and 3.3 V.
- The Wi-Fi radio is not emulated, so a sketch is built for a plain Pico and
WiFi.hdoes not compile. One of the RP2040's two cores runs:setup1()andloop1()do not. - Each pin's name is printed beside it on the canvas, because the real board keeps its pinout on the back.
